RIO Skagit iMOW Tips

RIO’s new series of sinking tips, called “iMOW’s”, are based on the hugely successful MOW tips, but built with an intermediate section instead of the floating section. Each iMOW is built with a translucent intermediate section, attached to a level length of T-11 (Medium) or T14 (Heavy), and features a welded loop in both ends for fast rigging. The intermediate section of the iMOWs create a fantastic transition between a floating Skagit head and the fast sinking tip for perfect depth control and the utmost in strike detection. Also a perfect addition to RIO’s Intermediate tip Skagit iFlight head. Medium iMOW tips feature T-11 for a sinking section (with a sink rate of about 8″ per second) and are most suitable for Skagit lines between 475-575 grains. Heavy iMOW tips feature T-14 for a sinking section (with a sink rate of about 9” per second) and are most suitable for Skagit heads of 575 grains and heavier. During 2016, these tips will move to ConnectCore. Only Tips and T-Coils packaged as “InTouch” can be safely re-looped using RIO Welding tubing. Also available as a complete set of 6 tips (either Medium, Heavy or X-Heavy), all labelled in a Rio Leader Wallet. £89.99 Type Length Line Weight Colour 10ft Intermediate 10.0 ft Medium Trans Green 7.5ft Int w/ 2.5ft of T-14 10.0 ft Medium Trans Green / Black 5ft Int w/ 5ft of T-14 10.0 ft Medium Trans Green / Black 2.5ft Int w/ 7.5ft of T-14 10.0 ft Medium Trans Green / Black 10ft Intermediate 10.0 ft Heavy Trans Blue 7.5ft Int w/ 2.5ft of T-14 10.0 ft Heavy Trans Blue / Black 5ft Int w/ 5ft of T-14 10.0 ft Heavy Trans Blue / Black 2.5ft Int w/ 7.5ft of T-14 10.0 ft Heavy Trans Blue / Black